DP Megacontrol Series, Инструкция по установке и эксплуатации

Страница: 23 / 72

23
Table 22: Parameter list PumpDrive 2 Eco
Para-
meter Description Help text Factory setting
3-1-2-2 Operating Keys Require
Login Direct access to the MAN, OFF, AUTO and FUNC
operating keys can be disabled via this parameter. 1=ON
3-2-1 Nominal Motor Data - -
3-2-1-1 Nominal Motor Power Nominal power of motor as per name plate Minimum to maximum limit
of value range set in kW
3-2-1-2 Nominal Motor Voltage Nominal voltage of motor as per name plate Minimum to maximum limit
of value range set in V
3-2-1-3 Nominal Motor Frequency Nominal frequency of motor as per name plate Minimum to maximum limit
of value range set in Hz
3-2-1-4 Nominal Motor Current Nominal current of motor as per name plate Minimum to maximum limit
of value range set in A
3-2-1-5 Nominal Motor Speed Nominal speed of motor as per name plate Minimum to maximum limit
of value range set in rpm
3-2-1-6 Nominal Cos Phi Value Cos phi of motor at nominal power 0.00...1.00
3-2-2 Motor Speed Limitation - -
3-2-2-1 Minimum Motor Speed - 3-11-1-1...3-2-2-2 (rpm)
3-2-2-2 Maximum Motor Speed - 3-2-2-1...3-11-1-2 (rpm)
3-2-3 Thermal Motor Protection - -
3-2-3-1 PTC Analysis Motor temperature monitoring OFF
ON
3-2-3-2 Thermal Motor Protection
Behaviour Behaviour for detection of excessive motor tempera-
ture Self-acknowledging
Non-self-acknowledging
(Service Tool only)
3-2-4 Motor Direction of Rotation Setting the direction of rotation of the motor with
respect to the motor shaft 0=Clockwise
1=Anti-clockwise
3-3-1 Motor Control Method Selecting the control method Asynchronous Motor
Vector Control
3-3-3-1 Start Automatic Motor
Adaptation 2. Standard AMA: The extended motor data is deter-
mined by taking a measurement with the motor being
at a standstill. Standard AMA - Motor at
Standstill
3-6 Open-loop and Closed- loop
Control - -
3-6-1 Type of Control Selecting the control method. The controller is deacti-
vated when OFF (Open- loop Control) is selected. 1=Discharge Pressure
3-6-5-1 Fixed Speed 1 Fixed speed selectable via digital inputs 3-2-2-1...3-2-2-2
3-7-1 Role in Multiple Pump
System Selecting the role of the frequency inverter in a multi-
ple pump configuration. The active master control
device is responsible for starting and stopping
pumps, as well as for open-loop and closed-loop
control. All input variables required for open-loop or
closed-loop control must be connected to the master
control device and all redundant master control
devices. The redundant master control device which
is to serve as the active master control is selected
automatically based on a configurable transfer time.
Auxiliary control devices and redundant master con-
trol devices receive their control value from the mas-
ter control device. 1=Auxiliary Control