D
OVRE
Subject to change because of technical improvements
9
Press for the second time, it displays
, set the
parameters for Tuesday. Press for the 7th time and
it displays
.
Press for the 8th time and it exits and recovers to
the current week day.
Press
.
Press for the first time and the timing function turns
on, the LCD screen displays
, the machine’s
indicator
lights green.
Press again to turn off, icon
on the LCD
screen
goes off. After the timing function is
turned on, it works according the parameter set-
tings. The LCD screen lights up according to cor-
responding parameter settings.
Note: when the time, week and timing para-
meters are changed, you need to switch on-off
the timing key to transfer the timing parameters
to the machine. After the machine has received
them correctly, the buzzer will beep once.
Press
.
Press once to turn on the Open Window function,
the LCD screen displays icon
, the indicator
on the machine lights yellow.
Press again to turn it off, the LCD screen does not
display icon
and the indicator
on the
machine goes off. The buzzer beeps when the key
is pressed.
After the Open Window function is turned on, the pro-
gram firstly detects if the heating function is turned on.
If it is turned on, the program will save the current
ambient temperature value and detects the ambient
temperature change once per 12 minutes. When the
decrease in the ambient temperature detected within
30 minutes exceeds 4°C,the program will deem that
the window is open and stop heating, and the Open
Window indicator
on the machine will flash rapidly.
After it has stopped heating for 70 minutes, the pro-
gram starts to detect if the window is closed, and the
indicator
flashes slowly. It heats for 6 minutes
every 30 minutes (position H2). If the temperature rise
is more than 2°C the window is considered as closed,
and the indicator stops flashing.
Care and maintenance
1. Switch off and unplug from the power supply
before cleaning.
2. Using a soft, moist cloth, with or without a mild
soap solution, carefully clean the exterior surface
of the products
CAUTION: Allow the product to completely
cool before handling or cleaning it.
3. Do not allow water or other liquids to run into the
interior of the product, as this could create a fire
and/or electrical hazard.
4. We also recommend the periodic cleaning of this
appliance by lightly running a vacuum cleaner
nozzle over the guards to remove any dust or dirt
that may have accumulated inside or on the unit.
CAUTION: Do not use harsh detergents, chem-
ical cleaners or solvents as they may damage
the surface finish of the plastic components.