Dovre TAI 45C, Инструкция по установке и эксплуатации

Страница: 48 / 224

2 1
2 1
09-20020-360
Position 1: factory setting for a standard hearth.
Position 2: the setting for a hearth with less draw.
The appliance is now ready for use.
Use
First use
When you use the appliance for the first time, make
an intense fire and keep it going for a good few hours.
This will cure the heat-resistant paint finish. This may
result in some smoke and odours. You could open win-
dows and doors for a while in the area in which the
appliance is located.
Fuel
Appliance TAI M can be used to burn brown coal bri-
quettes, anthracite coal and natural wood; sawn and
split and adequately dry.
Appliance TAI C is only suitable for burning anthracite
coal.
Do not use other fuels, as they can cause serious
damage to the appliance.
The following fuels may not be used as they pollute
the environment, and because they heavily pollute the
appliance and flue, which may lead to a chimney fire:
Treated wood, such as scrap wood, painted wood,
impregnated wood, preserved wood, plywood and
chipboard.
Plastics, scrap paper and domestic waste.
Fuel choice (TAI M)
1
2
09-20020-362
The fuel choice selector is located in the rear wall of
the stove. Set this to position 1 when burning coal and
to position 2 when burning wood, see previous image.
Wood
Hardwood, such as oak, beech, birch and fruit tree
wood is the ideal fuel for your stove. This type of
wood burns slowly with calm flames. Softwood
contains more resins, burns faster and sparks
more.
Use seasoned wood that contains no more than
20% moisture. The wood should have been
16
Subject to change because of technical improvements