Complete 101 Series Installation Manual
99-25517-I001 July 2022 Rev. B
118 |
P a g e w w w . a n t h o n y i n t l . c o m
Installing New Plastic Cover
1.
To install the new replacement plastic covers, begin by aligning the replacement plastic cover evenly onto the door rail, as shown in
Figure J.4.
2.
Insert the outer edge of the plastic cover into the outside groove of one of the door rails, as shown in Figure J.4.
Figure J.4 – Installing replacement Plastic Cover
3.
Push the plastic cover down and inward, toward the center of the door.
4.
Slide along the entire length of the plastic cover while firmly applying pressure against it. Continue applying pressure down along
the length of the entire door rail, inserting both the outside lip and the inside lip into the door rail grooves simultaneously, as
shown in Figure J.5.
NOTICE
Note:
Carefully tap the plastic cover using a plastic or rubber mallet with deliberate
strokes, outward and away from the glass, which may help seat the lips of the plastic
cover into the grooves of the door rails.
Figure J.5 – Applying pressure
5.
Check the entire plastic cover and confirm that both the inside and outside lips are fully inserted into the door rail grooves.
