Douglas® PPS-22SQ
Premier™ Portable Pickleball, 3’ x 22’
Item # 63122
FRAME INSTALLATION
STEP 1
Lay out all parts as shown in drawing;
start by attaching Stabilizer Legs (Ref. D)
to Corner Braces (Ref. B)
STEP 2
Insert the vertical end posts (Ref. A),
into the corner braces (Ref. B). Vertical
end posts should drop all the way down
to ground level inside the corner brace.
STEP 3
Attach and secure wheel assemblies
to the corner braces with a 9/16
wrench.
STEP 4
Assemble bottom frame by sliding
together all (4) bottom frame pieces
(Ref. E) using coupler pieces (Ref. F,G)
in layout as shown in drawing. There
should be no gaps between bottom
pieces. Full length should be 22’ once
assembled. (Inside of Post to Inside
of Post)
STEP 5
Tighten all pre-attached set
screws with provided allen
wrench to secure frame-
work into place. (Extra set
screws are included in
hardware bag in case any
are missing from frame)
STEP 6
Screw the (2) provided Eyebolts
into the threaded hole at top of
each vertical post.
Note: The eyebolts and handle
are located in a bag inside of the
take up post. **(2) extra eyebolts
are included.
SET
SCREWS
SET
SCREWS
HANDLE
EYE
BOLT
PAGE 2 OF 3
NOTE:
All base frame pieces
should touch
inside couplers
EYE
BOLT
DUMMY POST
TAKE UP POST
STEP 6
STEP 6
STEPS
4 & 5
STEPS
1 - 3
NOTE:
CAP IS PLACED
ON POST WITH
PULLEY FACING
OUT
