Lit. No. 52308, Rev. 06
13
May 1, 2021
5. Once the stop is making contact with the rib, lock
the hex nut into position with the 3/4" jam nut.
3/4" Jam Nut
3/4" Hex Nut
OPERATIONAL TEST AND FINAL ADJUSTMENTS
6. Repeat Steps 1–5 on the passenger's side of the
blade assembly, this time angling the blade fully to
the right.
NOTE: Adjusting the 3/4" hex nut inward too
far will cause the wing stop to contact the
blade rib before the blade is fully angled. This
condition can stretch the cables and shorten their
service life.
7. Grease
the
fi
ttings on the wing hinges.
