Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 52

Страница: 52 / 363

Alphabetical list of commands

delete user

Description

Deletes a user account. Except for the user you are logged in as, you can delete any user, including

the default users. However, the system requires at least one CLI user with the

manage

role to exist.

When a user is deleted, any sessions associated with that user name are terminated.

Min. role

manage

Syntax

delete user

[noprompt]

name

Parameters

noprompt

Optional in console format; required for XML API format. Suppresses the confirmation prompt, which

requires a yes or no response. Specifying this parameter allows the command to proceed without

user interaction.

name

The user to delete. Names are case sensitive.

Example

Delete user

jsmith

# delete user jsmith

Are you sure you want to delete user jsmith? (y/n)

yes

Delete user

Kim

and suppress the confirmation prompt.

# delete user noprompt Kim

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 52 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: