Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 214

Страница: 214 / 363

214 Alphabetical list of commands

test

Description

Sends a test message to configured destinations for event notification and managed logs. After

issuing this command, verify that the test message reached its destinations.

Min. role

manage

Syntax

test

Parameters

•

: This option behaves the same as the notification option and remains for backward

compatibility only.

•

managedlogs

: Specify this option to test receipt of the managed-logs notification that logs need

to be transferred. (Event 400)

•

managedlogswarn

: Specify this option to test receipt of the managed-logs notification that logs

are nearly full and must be transferred to avoid losing older entries. (Event 401)

•

managedlogswrap

: Specify this option to test receipt of the managed-logs notification that logs

have wrapped and older entries may be lost. (Event 402)

•

notification

: Specify this option to test receipt of event-notification messages by every

interface that is configured to receive them, such as email, and SNMP. (Event 312)

•

snmp

: This option behaves the same as the

notification

option.

Optional. For use with the managed logs feature, this parameter specifies the log type (debug-data

region) for which to send notifications.

•

crash1

crash2

crash3

, or

crash4

: Specify one of these options to send notification for one

of the Storage Controller’s four crash logs.

•

ecdebug

: Specify this option to send notification for the Expander Controller log.

•

: Specify this option to send notification for the Management Controller log.

•

scdebug

: Specify this option to send notification for the Storage Controller log, which includes

the event log.

If this parameter is omitted, the command sends four representative log types:

crash1

ecdebug

scdebug

, and

Example

Test receipt of event notifications by every interface that is configured to receive them.

# test notification

Test receipt of the managed-logs notification that the SC log needs to be transferred.

# test managedlogs region scdebug

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 214 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: