17
6.5.2
Joining onto an existing sachet roll (refills)
When the sachet roll loaded in Dosell is getting low, it is recommended that a new roll is
joined on to it using the tape supplied with Dosell. That way, the person who refills Dosell
does not need to be there at the precise time that the first sachet of the new roll is to be
dispensed, but instead can prepare the new roll one or more days in advance.
To join a new roll onto a previously loaded roll, select Load sachet roll
in the app’s main menu. Confirm in the app that the name on the
sachet roll matches that of the user whose Dosell is being loaded.
Then select Join onto existing sachet roll in the app and follow the
instructions.
Attention
Only use the tape strips supplied with Dosell to join rolls. If you use a different tape, it
cannot be guaranteed that Dosell will work correctly. One strip of tape is needed per
roll. If the tape runs out, you can order more from your place of purchase or find a
distributor at www.dosell.com.
Attention
Follow the instructions carefully when joining sachet rolls. Joining them incorrectly may
result in Dosell being unable to read or dispense sachets.
6.6 Removing medication sachets
6.6.1
Removing the entire roll
To remove a sachet roll that has been loaded into Dosell follow the instructions below.
1. Connect to Dosell – see section
6.3 Connecting to Dosell.
2. Open the cover – see section
6.4 Opening and closing the cover.
3. Select Eject sachet roll in the app’s main menu and follow the
instructions.
4. Remove the roll from Dosell.
5.
Close the cover – see section
6.4 Opening and closing the cover.
6.6.2
Removing individual medication sachets
If the user will be away from home for a lengthy period of time, one or more sachets can
be taken out in advance and taken with them so that doses are not missed. You can re-
load the remaining sachets on the roll and Dosell will then automatically resume
dispensing when it is time for the next sachet on the roll to be taken.
1. Connect to Dosell – see section
6.3 Connecting to Dosell.
2. Open the cover – see section
6.4 Opening and closing the cover.
3. Select Eject sachet roll in the app’s main menu and follow the
instructions.
4. Remove the roll from Dosell and tear off the number of sachets
needed. Always tear along the sachet perforations.
