16
To open the cover, pull the latch on the back as shown in the figure. Lift the over all the
way up until it locks in the open position.
To close the cover, carefully lower it and make sure that the latch (A) engages in the
hole (B). Press the outside in the corner (C) where the latch is located until you hear
a click.
6.5 Loading a new sachet roll
Dosell is designed to take sachet rolls with a diameter of up to 160
mm.
If the roll is larger than this, there is a risk that sachets will not be
dispensed because the roll cannot rotate freely in its space behind the
cover. If this happens, Dosell will give a warning that dispensing has
failed.
To load Dosell with a sachet roll follow the instructions below.
1. Connect to Dosell – see section
6.3 Connecting to Dosell.
2. If a sachet roll is to be loaded into an empty Dosell, follow step 6.5.1.
If Dosell has been loaded previously but needs to be refilled with a new
sachet roll, follow step 6.5.2.
6.5.1
Loading a sachet roll into an empty Dosell
To load a sachet roll into an empty Dosell (e.g. on initial startup), select
Load dose roll in the app’s main menu. Confirm in the app that the name
on the sachet roll matches that of the user whose Dosell is being loaded.
Then select Load new sachet roll in the app and follow the instructions.
