manualshive.com logo in svg

dosatron D25RE2, Руководство по устранению неисправностей, Страница: 1 / 17

Поделиться
Скачать
dosatron D25RE2 Скачать руководство пользователя страница 1

Page 1

800-523-8499

www.dosatronusa.com

Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.

Step 3:

 Then, remove the hose.

Step 2:

 If there is still no suction, turn the water on. If the unit is 

clicking, unscrew and remove the suction hose nut. 

NOTE: 

To service your D25RE2 you will need a strap wrench  

(Part #: TOOL01) and a small tip Phillips head screwdriver. 

Step 1:

 If your Injector is clicking, but not drawing the concentrate, 

it could be as simple as the strainer is plugged with debris. Take 

a look at the strainer. If it is clogged, clean it out and re-test your 

Dosatron. 

D25RE2 Troubleshooting - Part 1

This D25RE2 Troubleshooting will cover: The Injector is not drawing the concentrate, 

but is 

clicking.

Scan the QR code to 

watch our D25RE2  - 

Troubleshooting video. 

Strap Wrench 

TOOL01

Pick 

TOOL02

Plunger Seal

J009

Check Valve Seal

J051

Check Valve Assy.

MPDI122

Actuator Spring

M238

Piston Shell

P421

Push Rod O-ring

J020

Содержание D25RE2


















Отзывы:

Нет отзывов