DÖRR EcoGun AS MAN DC, Руководство по эксплуатации

Страница: 4 / 56

1 Product overview
1.1 Overview
Fig. 1: Overview
1 Air cap
2 Nozzle
3 Basic housing
4 Hook
5 “H. V.” indicator light
6 Material flow control
7 Housing
8 Connections
9 Paint tube
10 Flat jet control
11 Trigger
12 Electrode
13 Cap nut
1.2 Short description
The spray gun is intended for electrostatic
surface coating. Compressed air and direct
charging support the coating process. The
spray gun is hand-held.
The spray gun is available with three dif-
ferent paint connections:
Straight pipe: for flammable topcoats and
clear coats
Spiral pipe: for flammable metallic paints
Attached, non-conductive paint hose (5 or
10m long): for non-flammable paints
The following factors influence the spray jet
and therefore the result:
Alignment of the air cap
Ä
6.5 “Alignment
of the air cap”
Material quantity
Ä 5 “Commissioning”
Spray width Ä 5 “Commissioning”
2 Safety
2.1 Presentation of Notes
The following notes can appear in this
instruction:
Product overview
11/2019 EcoGun AS MAN DC - MSG00023EN 4/56