DÖRR EcoGun 249, Руководство по эксплуатации

Страница: 5 / 40

CAUTION!
Low risk situations that can lead to minor
injuries.
NOTICE!
Situations that can lead to material
damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Contains additional information
and recommendations.
2.2 Intended Use
The spray gun Eco Gun 249 is used exclu-
sively for hand guided spraying coating of
surfaces. Compressed air is used to apply
material.
The material is fed via a pressure line.
The use is only permitted in the industrial
area within the specified technical data.
Ä 10 “Technical data”.
The atomizer is approved for use in explo-
sive areas of Ex zones 1 and 2.
Wrong Use
Wrong use of the spray gun entails a risk of
death.
Do not aim the spray gun at people or
animals.
Do not atomize liquid nitrogen.
Only use the spray gun with components
approved for the use by Dürr Systems.
Only use approved materials. Observe
the safety data sheets.
Do not attempt to make conversions or
changes on your own.
Do not use spray gun in areas with Ex
zone 0.
EX labeling
II 2G T60°C X
II - Device group II: all areas except
mining
2G - Device category 2 for gas
T60 °C - Surface temperature max. 60 °C
X - Specific operating conditions for
safe operation
The following conditions must be observed
for safe operation:
Ground spray gun and work piece.
Only use conductive air hoses.
Ensure that static electricity can be dis-
charged.
Use compressed air quick couplings
exclusively for water-based materials.
2.3 Staff qualification
WARNING!
Inadequate qualification
If you do not assess risks properly,
serious injury or death may result.
– All activities must be conducted
exclusively by people who possess
the proper qualifications.
This instructions manual is intended for
qualified personnel in the industry pos-
sessing at least the following knowledge:
Safe operation of application stations
Fundamentals of electrical engineering,
hydraulics and pneumatics:
Safe handling of the used material, oper-
ating and auxiliary materials
Training for operation, maintenance and
troubleshooting
Dürr Systems offers special product training
Ä “Hotline and Contact”.
Safety
12/2016 EcoGun 249 - MSG00014EN 5/40