Power on the phone
Press and hold the red button
on the
phone to turn it on and off.
If the SIM card is valid but protected with a
PIN code (Personal Identification Number),
Enter PIN
is displayed.
Enter the SIM PIN code and press
OK
(
upper left corner of keypad). Delete with
Delete
(
upper right corner of keypad).
Setting the language
The default language of the phone menu,
messages and so on is determined by the SIM
card used (Automatic). You can always switch
between the languages supported by the phone.
1.
Press
Menu
â
Settings
â
OK
.
2.
Select
Phone settings
â
OK
.
3.
Select
Language
â
OK
.
4.
Select language
â
OK
.
Setting time and date
1.
Press
Menu
â
Settings
â
OK
.
2.
Select
Phone settings
â
OK
.
3.
Select
Time and date
â
OK
.
4.
Select
Set time/date
â
OK
.
5.
Enter the time (HH:MM)
â
.
6.
Enter the date (DD/MM/YYYY)
â
OK
.
1.
Receiver/
loudspeaker
Make phone calls holding
the cell phone to the ear
2.
Display
3.
Left soft key
Right soft key
Selection of the main menu
Open the phone directory
4.
Call button
Dial and answer calls;
open the call log
5.
Arrow keys
In idle state
to open the
quick access list
to open messages.
Scroll up and down in
menus and lists
6.
Speed dial
Speed dial the numbers
saved under M1, M2 and
M3 with one keystroke
7.
*
key
In idle state: to enter: “*”/ “+”
/ “P”/“W“;
Input: special characters
8.
#
key
In idle state: long keystroke
to toggle between ring tone
on/off;
Input: toggle input modes
9.
Microphone
10.
Numerical
keys
In idle state: input of phone
number;
long keystroke on 1: calling
the voice mail box (the
phone number must be
stored)
11.
Exit key
Exiting a call, returning to
idle state; switching the
phone on/off
12.
LEDs
Notification of missed
calls and received text mes
-
sages,
Battery charging
13.
Micro USB
port
For battery charger
14.
Headset
connector
For standard headset with
3.5 mm
phone jack
Installing the SIM card and the battery
The SIM card holder is located inside the battery
compartment.
CAUTION
Only use batteries, charger and accessories
that have been approved for use with this
particular model. Connecting other accessories
may be dangerous and may invalidate the
phone’s type approval and guarantee.
1.
Remove the cover
of the battery
compartment by
placing a thumb on
the cover’s riffle on
the rear of the phone
casing and pushing
the cover downwards.
If the rechargeable
battery is inserted,
remove it by lifting it
on the notch at the top
using a finger nail.
2.
Insert the SIM card
by carefully pushing
it under the metal
bracket on the lower
side. Make sure the
contacts of the SIM
card point downwards
and the cut-off corner
fits exactly in the
recessed shaping
of the holder. The
contacts of the SIM
card must not be
scratched or bent.
Try not to touch the
contacts with your
fingers.
3.
Insert the rechargea-
ble battery by pushing
it into the battery
compartment ensuring
that the three contacts
on the front touch the
three spring contacts
on the bottom in the
battery compartment.
4.
Replace the cover
and push it upward
using gentle pressure
with the thumb until
it snaps securely into
place again.
When the battery performance is low, the
empty battery symbol flashes to indicate the
battery state and an alarm signal will sound. To
recharge the battery, connect the mains adapter
to the micro USB connector on the bottom side
of the phone.
When the battery charger is connected to the
phone, the red charging LED is on. The battery
charge status moves when the battery is
charging (visible in the upper right corner of the
display).
A complete charging process of the recharge
-
able battery takes approximately 3 hours. When
the battery is fully charged the animation of the
battery charging status stops.
1
2
3
4
5
6
7
8
9
10
11
14
12
13
Primo
™
401
Quick Start Guide
English
© IVS GmbH 2015 • All rights reserved
QSG_Primo_401_en_A4(A7)_v1.1
English
Version 1.1
0197
Specifications
Network:
GSM 900/1800 MHz
Dimensions:
91 mm x 46 mm x 19 mm
Weight:
74 g
Battery:
3.7V/800 mAh Li-ion battery
Operating ambient temperature:
Min: 0°C (32°F) Max: 40°C (104°F)
Charging ambient temperature:
Min: 0°C (32°F) Max: 40°C (104°F)
Storage temperature:
Min: -20°C (-4°F) Max: 60°C (140°F)
Changes and errors excepted.
EN