Doro COMFORT 1015, Руководство пользователя

Страница: 11 / 20

English
Note!
This model is GAP (Generic Access Profile) compatible, which means that the
handset and the base unit can both be used with most other GAP compatible
units irrespective of manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed.
1. Hold down
J
on the base for around 6 seconds.
2. Press . Select REGISTRATION . Press OK .
3. Select the base unit you wish to register. Press OK .
4. Enter base unit’s PIN code (default code is 0000). Press OK .
5. If the registration is successful the unit will return to standby within one
minute.
Intercom / internal call
1. Press .
2. Enter call number
1
-
5
for the desired handset or press
9
for all.
A tone will be heard if an external call comes in while an internal call is
in progress. End the internal call with
L
and then answer the external
call with
q
.
Transferring calls/conference between handsets
When an external call is connected;
1. Press .
2. Select INTERCOM . Press OK .
If using more than 2 handsets: Enter call number
1
-
5
for the desired
handset or press
9
for all.
3. To transfer: press
L
,
for conference: press and hold
*
.
Answering machine
When the answering machine is switched on, calls are answered after a set
number of rings, your outgoing message is heard and the caller can leave a
message. Total memory capacity is up to 30 minutes depending on the set
sound quality. Most functions can be accessed from both base unit and handset.
Setup from handset
1. Press . Select ANS. MACHINE . Press OK .
2. Select TAM SETTINGS . Press OK .
3. Select desired function. Press OK .
4. Select desired setting. Press OK .
7