Dorner 62M005ESBDDEN, Инструкция по установке, эксплуатации и запасным частям

Страница: 6 / 20

Dorner Mfg. Corp. 6 851-738 Rev. A
Brushless DC Motor Control
Installation
Required Tools
• 6 mm hex head wrench
• Flat-blade screwdriver
• Phillips screwdriver
Installation Component List (Figure 2):
Figure 2
Figure 2
Conveyor Mounting
1. Install spring t-nuts (Figure 3, item 1) into conveyor t-
slot.
Figure 3
Figure 3
2. Attach controller (Figure 4, item 1) to conveyor with
screws (Figure 4, item 2).
Figure 4
Figure 4
3. Slide controller to its desired mounting location along
conveyor and tighten both screws.
1 Controller Mounting Bar (2x)
2 Brushless DC Controller
3 Motor Power Cord
4 External Signal Cord
5 Power Supply Cord
6 Hex Head Screws, M4 x 16 mm (4x)
7 T-Bar
8 Hex Head Screws, M6 x 16 mm (2x)
1
2
8
7
3
4
5
6
1
2