2 Safety
Fig. 1
Color
Do not damage the product
2.1 Intended use
SVI locks are used to lock doors automatically and
securely each time they are closed.
The locks can be opened from the panic side either via
the fixed or active leaf in the escape direction at any
time via the fitting.
• Only mount combinations of lock and fitting that
have been tested and approved in accordance with
EN 179 or EN 1125. The list of approved components
can be found in the constancy of performance
certificate at www.dormakaba.com. Other
combinations on request.
• Use only in combination with the SVA locks offered
by dormakaba. Combinations with locks from other
manufacturers must be approved by dormakaba.
• Panic locks may only be mounted on fire and
smoke protection doors if the usability certificates
for these doors provide for the mounting, and if
the requirements in the usability certificates are
followed.
• The following SVI locks are suitable for use on fire
and smoke protection doors: SVI 5000, SVI 4000,
SVI 2000F.
• The SVI 2000 may only be used in fire and smoke
protection doors in combination with the external
Power Reserve module "SVP-PR DCW®" (item no:
70922601).
2.2 Not intended use
• The lock may not be opened by third parties. If
the lock is opened by a third party, there is a risk
that safety-relevant functions (e.g. escape/panic
functions) will no longer exist.
• The identification plate on the lock contains
important information required by law and must
not be damaged or obscured.
2.3 Limitations on use
• Cannot be combined with SVP locks.
• Do not make any changes to the door unit that are
not described in this manual.
• If door seals (e.g. profile seals, floor seals) are used,
they must not impede the intended function.
3
SVI Lock
2019-12
dormakaba Mounting instructions
Safety
WN 059741 45532