EN
STV-A
Mounting instructions
1 About this manual
1.1 Target group
The connection adapter STV-A must only be mounted
by trained electricians with specific knowledge of
electromechanical locks, fire safety codes and
regulations.
1.2 Intended use
The STV-A exclusively serves to integrate door locks
into the SafeRoute® system.
1.3 Other applicable documents:
• System instructions for the used SafeRoute® license
• Operating instructions for the SafeRoute® system
• Mounting instructions and assignment of terminals
for the door lock used
• Inspection log
1.4 Symbols used
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
1.5 Further labeling
1.
2.
Sequence of action steps
5
Reference to a chapter
Components may be damaged by
electrostatic discharges
2 Safety
ATTENTION
Risk of property damages from electrostatic
discharge.
The control board may be damaged by an
electrostatic discharge!
• Ground your own body before touching a
component!
3 Product description
The STV-A is an adapter for connecting electro-
mechanical or electro-magnetic locks for swing doors.
The STV-A integrates door locks that do not have a
DCW® bus connection into the SafeRoute® system.
Only door locks complying with the “Directive on
electrical locking systems of doors in escape routes”
(EltVTR) and/or DIN EN 13637, as well as other
applicable regulations, may be used in the SafeRoute®
system.
WN 059505 45532
2019-09
