dormakaba USA Inc. Remote Disable HW/SW Setup 7044.0822 Rev A 08/22 |
5
The LA GARD Software PC Link screen
Remote Disable – Keypad Setup
Users can also configure the Input Signal as a Remote Disabled signal using both
Display and Non-Display Keypads.
Display Keypad Setup
Follow these steps to configure the Input Signal on a Display Keypad:
1.
Enter an Authorized User ID and Combination.
2.
Navigate through the Main Menu and select “System”
3.
Select “Input Signal” from the sub-menu.
4.
Scroll through the list of options and select “Disable Open” to set the Input Signal
to Remote Disable mode.
5.
“Success Mode updated” will appear on screen and the Keypad will beep three
times and flash a green LED once complete.