1. Place the mortise cylinder through the 1-3/16” hole in
the center of the aluminum faceplate.
2. Mount the cylinder/switch bracket on the reverse side
of the faceplate as shown in the profile photos below.
Make sure that the teeth are positioned inside the
grooves along the cylinder.
Attach the cylinder nut to fasten.
3. Insert the switch(es) into the 1/2” holes located on
the bracket below the cylinder. For ideal installation
thread the top nut an 1/8” down and tighten bottom
nut using a 9/16” wrench.
4. Make wire connections per illustrations below.
5. Fasten keyswitch to electrical box with the tamper-
proof 6-32 machine screws and spanner hand tool
supplied.
Rear Profile
Optional DPDT Switch Connection
Side Profile
Instructions
TAMPER-RESISTANT KEYSWITCH
960
I N S T A L L A T I O N
Red N/C
Black (Common)
Red N/O (Maintained)
Green N/O (Momentary)
(SPDT)
SPDT Wire Connection
IS960
PCN18003
R01-18TG
1-3/4"
(44mm)
1-3/16" (30mm)
2-3/4" (70mm)
3" (76mm)
1-11/16" (Narrow)
(43mm)
Narrow Style = 960N
N/C 1
(Red)
N/O 2
(White)
N/O 1
(White)
Common 2
(Black)
Common 1
(Black)
N/C 2
(Red)
1-1/2"
(38mm)
27/32" (Narrow)
(21.5mm)
1/2" (13mm)
Switch Mounting
Hole
4-3/4"
(120.6mm)
© 2018 dormakaba Canada Inc. | dormakaba Group
www.rutherfordcontrols.com • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]