Dormakaba LA GARD 700 Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 76

background image

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 37

Note:

If the Time/Date is not set after a prolonged power outage, access time lock schedules cannot be

enforced and may result in the inability to open the lock until the Time/Date is set.

3.9.2 Change Time/Date/DST – Non-Display Keypad

Follow these steps to change the Time/Date on a non-display Keypad:

Note:

Model 701 does not allow for the time to be set.

To change the Time/Date:

1.

Using the Keypad, input the pound key (#) and the number 65

2.

Input the Authorized User ID and Combination

3.

Input the 10-digit Time Date (YY-MM-DD-24HR Clock)

4.

Press <return key> (←)

5.

The Keypad will beep three times and flash a green LED once complete.

To enable/disable Observe DST:

1.

Using the Keypad, input the pound key (#) and the number 63

2.

Input the Authorized User ID and Combination

3.

Press 0 to not observe DST, or Press 1 to observe DST

4.

Press <return key> (←)

5.

The Keypad will beep three times and flash a green LED once complete.

Changes to DST must be done via the LA GARD software. For more information, refer to the LA GARD help
menu and to section

3.17 "Time/Date Rules in LA GARD 700 Series Locks"

3.10 Battery Levels

On a Keypad with a display screen, a battery level indicator is located at the bottom-right of the screen. The
battery level indicator shows 5 levels of battery power. Additionally, on a Display Keypad, indications will be
made when the battery level reaches low level and again when it reaches the critical low level.

On a non-display Keypad, the Buzzer and LED indicates the battery level. If the Buzzer Mode is Off, there will be
no sound indications. The LA GARD Software client reports battery levels in Keypads and Locks with an Audit
transaction.

Note:

If the Keypad is using an AC Adapter, then the battery level indicator will always be at high.

3.10.1 Low Battery Warning

Low Battery Warnings indicate that the batteries need to be replaced immediately to ensure continued and
safe operations of the device.

3.10.1.1 Low Battery Warning – Display Keypad

Keypads with a display will provide the following indicators as a Low Battery Warning:

•

Upon wake-up, the Keypad will emit 2 high beeps and 2 green LED flashes, followed by 2 low beeps and
2 red LED flashes.

•

The screen will display “Low Battery” on wake-up and at the end of an open sequence.

«
...
36
37
38
39
40
...
»

Содержание LA GARD 700 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для LA GARD 700 Series

Бренд: Vectaire Страницы: 2

Бренд: ubbink Страницы: 61

Бренд: Tweco Страницы: 64

Бренд: Assa Abloy Страницы: 8

Бренд: Firepower Страницы: 52

DYNAMIC HEAT CONTROL PLUS Series

Бренд: Napoleon Страницы: 72

PRO-POWER I140A MMA Efficiency

Бренд: VITO Страницы: 16

PRO POWER VIAS200

Бренд: VITO Страницы: 16

Fantech SE 704N

Бренд: SystemAir Страницы: 20

Бренд: Buffalo Tools Страницы: 16

Бренд: ATE Страницы: 9

BlueWave LED VisiCure 41062

Бренд: dymax Страницы: 24

Бренд: Draper Страницы: 16

Бренд: Draper Страницы: 24

Бренд: Stel Страницы: 54

Бренд: Entrematic Страницы: 50

Бренд: Entrematic Страницы: 56

Ditec DAS107PLUS

Бренд: Entrematic Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды