C800 Cylindrical Lever Set
Installation Instructions
76013497 02/18
www.dormakaba.us
1.1.1 Place latch into door edge.
Orient such that the beveled edge of latch
faces door jamb.
1.1.2 Secure with two 8-32 x 3/4” combo screws.
PART LIST
1- IC CORE
2- OUTSIDE IC LEVER
3- OUTSIDE ROSE
4- OUTSIDE ROSE INSERT
5- THRU BOLT RETAINER
6- CHASSIS
7- INSIDE ROSE
MOUNTING PLATE
8- 10-32 X 1-1/2” SCREWS (X2)
9- INSIDE ROSE
10- LEVER INSERT
11- INSIDE LEVER
12- LATCH
13- 8-32 X 3/4” COMBO
SCREWS (2)
14- OUTSIDE CONVENTIONAL
CYLINDER LEVER
15- CONVENTIONAL CYLINDER
Beveled
edge
Latch bolt
extension
Latch bolt with
extension & sleeve
Latch bolt
sleeve
1.2.1 Connect latch bolt
extension to latch
bolt.
1.2.2 Slide sleeve over
top of both,
extension and
latch bolt.
1.2.3 Extension can be
oriented in either
direction.
Adjust for door thickness
NOTE: Lock comes adjusted for
1-3/4” door from the factory.
1.3.1 Align so center of chassis is in
line with center of latch.
1.3.2 Slightly separate thru-bolt
retainer from outside rose
assembly.
1.4.1 Hold lock
assembly in
place.
1.4.2 Thread inside
rose mounting
onto chassis
until snug
against door.
1.3.3 Rotate outside rose assembly
to adjust for proper door
thickness.
1.3.4 Realign thru-bolt retainer with
outside rose.
Install chassis
1.3.5 Slide lock assembly into face of door.
Be sure to engage the inner latch
mechanism of the chassis with the back of
the latch as shown.
Center of
latch
Chassis
Latch or
latch bolt
with
extension
1.5.1 Push inside rose onto
inside rose mounting
plate.
•
Orientation:
rose notch
faces downward.
NOTE: Be sure lever insert
is inserted into inside lever
prior to installation.
1.5.2 Push inside lever
onto spindle until
it clicks into place.
Spanner
wrench
Rose
mounting
plate
Chassis
Outside rose
assembly
Thru-bolt
retainer
Inside
lever
Inside
rose
Spindle
Inside
rose
mounting
plate
Rose
notch
location
1.6.1 Insert strike as shown, and secure with
two 12-24 x 1” combo screws.
STRIKE PART LIST
1 - STRIKE PLATE
2 - DUST BOX
3 - 12-24 X 1” COMBO-SCREWS
Non-wood doors
3
2
1
Tools required
#2 Cross drive screwdriver
Flathead screwdriver
1 Cylindrical lock installation
1.1
Install latch
Fig 1
1.2
Optional extension instructions
Fig 2
1.3
Install lock assembly
Fig 3
1.4
Install inside rose insert
Fig 4
1.4.3 Ensure mounting
plate is aligned
with holes in door.
1.4.4 Secure mounting
plate to chassis
using two
10-32 x 1-1/2”
screws.
1.5
Install rose
Fig 5
1.6
Install strikes
Fig 6
2
10
9
8
7
1
3
13
12
11
14
15
4
5
6