dormakaba 8300/F8300 Exit Device Installation Instructions
95011759 (1135-30) I8300-15
06-2020
Exit Device
6
Install strike and chassis (fire door)
Install chassis, exit device, and trim
Install covers, end caps, end covers
1.6 Install strike and chassis (fire door)
1.7 Install chassis, exit device and trim
1.6.1 When installing F8300 series device on fire
doors, install strike angle (Pt. NO. 8300-015-
400) per “FIG. AA”, using spotting template
T8300.
1.6.2 Install strike angle using (2) 12-24 F.H.P.M.S.
and (2) 12-24 R.H.P.M.S. to door per drawing.
1.6.3 Install chassis using (2) 12-24 R.H.P.M.S. and
(2) 12-24 F.H.P.M.S. to door per drawing.
Install chassis to touch bar; install exit device and
any trim using screws as noted on the spotting
template.
1.7.1 Level touch bar/chassis assembly on door, hold
mounting plate against touch bar, mark (2)
holes and drill.
•
No. 25 drill 1” [25] deep for wood doors.
•
No. 14 drill 12-24 tap for metal doors.
•
3/8” [10] diam. drill through door for sex bolts
1.7.2 Fasten mounting plate (against rail) to
door with (2) round head phillips screws.
1.7.3 For electronic options; drill additional 5/16”
[8] diam. hole per detail above.
Chassis
A.
B.
Mounting plate
C.
5/16” dia.
Level
Touch bar and rail assembly
1.8 Install covers, end cap, end cover
1.8.1 Install cover(s) using (4) 8-32 x 1/4” [6] T.H.P.M.S
1.8.2 Install end cap using (2) 8-32 x 1” [25] P.H.F.H.T.S.
1.8.3 Install end cover using (2) 8-32 x 1/4” [6] T.H.P.M.S.
