PAGE
INS NO.
Rev.
08279351
09/09
1 of 3
(4)
8916 / 8956 TDE, TDEH
1
2
4
TRACK DOUBLE EGRESS - PULL SIDE MOUNT
AND ACCESSORY PLATE BP89
WOOD FRAME
METAL FRAME
QTY
(4)
(4)
HOLD OPEN MECHANISM
(LH DOOR)
as shown. Arrow on plate to point toward arm
(RH DOOR)
BP89 Plate applications only. Attach plate to door
attachment.
3
QTY
(4)
QTY
QTY
METAL FRAMES
QTY
(4)
L
WOOD FRAMES
PLATE
(LEFT HAND DOOR)
(RIGHT HAND DOOR)
L
HINGES
C
HINGESC
Attach closer to door or plate with sweep and
latch valves facing hinges.
according to appropriate template.
Determine hand of door.
Prepare door and frame
(REFERENCE UNIT CARTON FOR ACCESSORIES AND
OPTIONS SUPPLIED)
LISTINGS.
IDENTIFIED IN THE INDIVIDUAL DOOR MANUFACTURER'S
DOORS, UNLESS AN ALTERNATIVE METHOD IS
WOOD OR PLASTIC FACED COMPOSITE TYPE FIRE
OF COMPONENTS TO UNREINFORCED DOORS AND TO
CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT
REVERSE BEVEL
RIGHT HAND DOOR
LEFT HAND DOOR
REVERSE BEVEL
RIGHT HAND
LEFT HAND
(WOOD)
(METAL)
(2)
QTY
(2)
QTY
L HINGES
M6 HEX KEY
ARM TO SLIDE SHOE
(1)
QTY
C
END BLOCK
END BLOCK
END BLOCK
L HINGES
(TDEH UNITS ONLY)
SLIDE SHOE
C
RUBBER STOP
SLIDE SHOE
into track and attach track to frame.
(TDE UNITS ONLY)
NOTE: (A) MOUNTING SCREWS PASS THROUGH END
(B) RIGHT HAND SHOWN.
Insert slide shoe, rubber stop and end blocks
END BLOCK
Assemble track and attach to frame.
BLOCKS.
RUBBER STOP
stop, hold open mechanism, and end blocks into
and tighten securely. Insert slide shoe, rubber
Attach arm to slide shoe using screw supplied
track and attach track to frame.
IMPORTANT :
L HINGE
C
NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST
BE INSTALLED WITH ARROWS POINTING AWAY
FROM THE DOOR HINGES. (ARROWS ARE
STAMPED ON SLIDE SHOE & HOLD OPEN
MECHANISM)
INSPK 08279350 Rev.09/09
