*
*
*
*
*
*
*
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way. This warranty
gives you specific legal rights and you may also have other rights which vary from State to
State. The warranty does not cover the wearing, tearing, fading or splitting of the leather.
WARNING: Should this product become
damaged, and/or components are broken
or missing, DO NOT USE.
Phillips head screw driver is not included.
DO NOT
use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CARE AND CLEANING
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be
used occasionally to clean the surface. Dry immediately and buff lightly, following the grain.
Avoid using harsh cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items.
Cover extension leaves (if applicable) with a soft protective fabric before storing. Do not slide
objects across the surface - always lift them.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
DOREL ASIA LIMITED WARRANTY
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.
