Dorel Juvenile Group Alpha Omega Elite 65, Руководство пользователя

Страница: 36 / 38

69 70
Place Booster Seat in
Vehicle Forward-Facing
in the Back Seat
Place booster seat in the
back seat, flush against the
back of the vehicle seat. Do
not use any recline position
except to make the booster
seat flush against the vehicle seat back. Vehicle seat back must
be in the upright position.
1.
2.
3.
H-2 Installing Using the Lap and
Shoulder Belts
Place Child in Seat
Place the child’s bottom
and back flat against the
booster seat. This will
allow the vehicle belt to be
properly tightened.
Adjust the headrest so that
the midpoint of the child’s
ears are at the midpoint of
the headrest.
2.
NOTE: Do not use the level to ground lines on the sides of the
shell. DO NOT use a locking clip when using this seat as a
booster seat.
H. Installing Booster Seat
Secure UAS Belts
You MUST fasten the UAS
connectors to the UAS
attachments as shown when
using as a booster seat.
Secure Tether Hook
You MUST attach the
tether hook to the tether
attachment as shown.
Tighten tether to remove the
slack.
Booster Seat MUST be
Upright
Pull out on recline
handle and position the
booster seat fully upright
(1) .
continued on next page.
1
Buckle Lap and
Shoulder Belt
Lap belt should cross
the child’s thighs (not
on the stomach). The
shoulder belt should lay
snugly across the center
of the child’s shoulders
and across the chest (not on the face or neck). Both belts
should be under the armrest as shown. Pull up on the
shoulder belt to tighten.
3.
1.
4358-5694 Elite Eng.indd 71-72 4358-5694 Elite Eng.indd 71-72 11/16/11 1:24 PM 11/16/11 1:24 PM