63
Installation Tip:
Loosely attach the
tether hook before
attaching the
UAS belt. Consult
vehicle’s owner
manual for specific
location.
2.
Connect UAS to
Vehicle UAS Anchor
Bar
NOTE:
The UAS
connector’s red release
button
MUST
face away
from child restraint and
the arrows on connectors
MUST
face up.
Fasten one UAS connector
to the UAS anchor bar in
the vehicle seat bight.
Repeat for other side of
child restraint.
G. Installing Forward-Facing with UAS
64
Tighten the Tether
Strap
With knee still in child
restraint, push down
on the child restraint
again and pull on free
end of the tether strap
to tighten.
4.
Tighten UAS Belt
Place knee in the child
restraint. Push down firmly
while pulling up on the
free end of the UAS belt to
tighten.
3.
It may be easier to tighten
the belt through the belt path
opening as shown.
Check UAS Belt
Tightness
Grasp the child restraint
at the belt path
with one
hand. Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 2.5
cm (1 in) and the UAS belt
should not loosen.
NOTE:
If it moves more than 2.5 cm (1 in.) or if the UAS belt
loosens, try reinstalling the child restraint or try another seating
location.
Secure your child in the child restraint.
To Remove UAS Belt
From Vehicle Anchor Bar
Remove child from child
restraint. Press down firmly
on child restraint and press
the red release button on
each connector and pull
the connector from the UAS
anchor bar.
6.
5.
4358-5694 Elite Eng.indd 65-66
4358-5694 Elite Eng.indd 65-66
11/16/11 1:24 PM
11/16/11 1:24 PM