34
D. General Vehicle Installation
Your vehicle’s features may be considerably different than
those pictured here. Consult your vehicle owner’s manual to
help identify your vehicle’s specific features and locations.
D-1
Understanding Your Vehicle
Anchor Brackets
For Tether Strap
(Forward-Facing Only)
UAS Anchor Bars
Located in the seat
bight.
Airbags
Consult your vehicle
owner’s manual for
all air bag locations.
Seat Bight
Vehicle Seat Belts
Consult your vehicle
owner’s manual for
vehicle belt use.
Safety Tip:
To help protect your vehicle seat’s upholstery from
damage, use a car seat mat or a single layered towel
underneath and behind child restraint.
To avoid your child being seriously burned,
take the following precautions:
1. Park in the shade or where sun does not directly
hit the child restraint or booster seat.
2. Cover the child restraint or booster seat with a
sheet or blanket when not in use.
3. Check for hot seat and buckles before placing
child in child restraint or booster seat.
33
Attach Harness Straps to
Splitter Plate
From the back of the child
restraint, fit the harness
strap loops onto the splitter
plate.
10.
Harness straps MUST be threaded over the
metal headrest adjustment bar.
You must install the harness system properly.
Failure to follow these warnings can result in
serious injury or death.
NOTE:
Make sure sewn end of the harness strap loops
faces towards you. DO NOT twist harness straps or
harness adjustment strap and make sure the harness
straps are COMPLETELY ON the splitter plate.
4358-5694 Elite Eng.indd 35-36
4358-5694 Elite Eng.indd 35-36
11/16/11 1:24 PM
11/16/11 1:24 PM