Make Harness Straps
Even
Take both ends of the
harness strap and make
them even in length.
NOTE:
Make sure harness
adjustment strap is between the harness strap and shell as
shown.
Do not twist harness straps.
C. Basic Use
32
continued on next page.
Thread Harness Guides
on Harness Strap
Slide one harness guide on
each harness strap end.
6.
5.
Secure Harness Guides
Press harness guides into
the holes in the pad and
shell.
7.
31
3
4
Thread left harness
strap through left buckle
tongue and right harness
strap through right buckle
tongue.
(3)
Make sure
to push through from the
back of buckle tongue.
Thread the chest clip
from front to back as
shown
(4)
.
Do not twist
harness straps.
Push left harness strap
through left upper harness
guide and right harness
strap through right upper
harness guide
(5)
.
8.
Thread Harness Strap
NOTE:
Make sure sewn end
of the harness strap loop
faces the buckle before
starting.
Thread the harness strap
down through lower
harness guide on left side of
shell
(1)
across bottom of
shell and up through lower
harness guide on right side
(2)
.
NOTE:
For easier assembly,
remove the harness guides.
See section C-8, step 2.
4.
1
2
Thread Harness Straps
OVER Metal Bar
DO NOT twist harness
straps.
9.
5
4358-5694 Elite Eng.indd 33-34
4358-5694 Elite Eng.indd 33-34
11/16/11 1:24 PM
11/16/11 1:24 PM