28
27
C. Basic Use
continued on next page.
C-8
Removing Seat Pad for Cleaning
You must remove the harness system to remove the
pad, see section C-7.
Release the Elastic Straps
Release the elastic straps on
the back and under side of
the child restraint.
1.
2.
Lower Harness Guides
A
Remove Lower Harness
Guides from Bottom of
Seat
From the back, in the fully
upright position, locate the
lower harness guides that
are between the bottom of
the seat and base
(A)
.
Insert a flat head screw
driver into the hole in the
base where the lower
harness guide is located.
a.
Place the screw driver’s tip
between shell and lower
harness guide, then twist
the screw driver while
pulling the harness guide
from the front. Repeat for
other side.
b.
Remove Seat Pad
Adjust the headrest to the
lowest position. Pull pad
off the top of seat and
around headrest pad. Pull
the pad off the bottom of
shell and remove the pad.
3.
4.
Upper Harness Guides
Remove Upper Harness
Guides
From the back of child
restraint, pinch harness
guide ends together or
use a screwdriver to press
in on harness guide edge
as shown. With the other
hand, from the front of the
restraint, pull the harness
guides out of the headrest.
Remove headrest pad.
4358-5694 Elite Eng.indd 29-30
4358-5694 Elite Eng.indd 29-30
11/16/11 1:24 PM
11/16/11 1:24 PM