Furniture Wall Safety Strap
1
2
3
4
5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
Step 7:
Drill two 3/8" holes into the wall. Press the wall anchors (2) into the holes and gently tap until the flange on the
anchors is against the wall surface.
Position the brackets (3) over the anchors (2) and use the long screws (5) to securely attach the brackets (3)
to the wall.
Step 1:
Step 2:
Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).
Step 8:
Step 3:
Step 4:
Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3), screw
holes approximately 2" below the brackets mounted to the edge of the furniture.
Step 5:
Step 6:
Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.
Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together and slide
the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pull down on the
beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyholes as shown.
Check to make sure the straps (1) are securely laced and locked to the brackets (3).
SAFETY WALL STRAP
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE
SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
LONG SCREW
2 PCS
SHORT SCREW
2 PCS
MOUNTING BRACKET
4 PCS
WALL ANCHOR
2 PCS
A
B
Email:[email protected]
A
B
