STEP 6
NOTE:
Slats (T & L) will be placed between two wooden blocks.
NOTE:
If you notice that any slats (L) are not perfectly flat, be sure to assemble them so
that slats (L) curves up in the middle and down on the ends.
TWIN BUNK BED
DA1008BB-1 & DA1008BB-2 / DA1008BB-1W & DA1008BB-2W
Insert two slats (T) into the center slots of the bottom side rails (I & K) on the lower bunk as
shown.
Insert slats (L) into the remaining holes on the bottom side rails (I & K) on the lower bunk.
Secure slats (L) to the bottom side rails (I & K) with flat head screws (4) using a Phillips
screwdriver (not included).
Repeat this process for the upper bunk.
NOTE: Once inserted, there should be three empty spaces left on each side.
I
K
T
L
4
