Doosan DP158L Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 56 / 262

4. Regular inspection
50
Engine Oil Capacity
Please replenish the engine oil based on the following
recommended oil amount.
Checking the Engine Oil
Check the oil level everyday using an oil level gauge.
1. The oil level should be checked when the engine is
stopped and on an even level. If you started the engine,
wait for 5~10 minutes to allow the engine oil to flow back
into the oil pan.
2. Pull out the oil level gauge, and clean the indication line
of the oil level gauge with clean cloth.
DV2213163A
3. Insert the oil level gauge, and then pull it out to check the
engine oil level, viscosity, and contamination. Replenish
or replace the engine oil if required.
DV2213016A
1) Check the oil level everyday using an oil level gauge.
2) Check if the oil is smeared between the upper limit (A)
and the lower limit (B) of the oil level gauge.
3) If engine oil is smeared below the lower limit (B) or not
smeared on the gauge at all, replenish engine oil.
4) Check condition of engine oil. If it is polluted, replace it
with new oil.
Engine Model
Engine oil capacity (
ℓ
)
Max. Min.
DP 158L 22 13
DP 180L 34 23
DP 222L 40 27
CAUTION
Cleaning the indication line of the oil level gauge with
dirty cloth allows the foreign substances to get into the
engine, causing damage to the engine.
Max
Min
CAUTION
• Do not fill the engine oil above the upper limit.
Exceeding the upper limit may damage the engine.
• Be careful not to let foreign substances flow into the
engine when replenishing engine oil.
A
B