Doosan A0509 Скачать руководство пользователя страница 29

Страница: 29 / 253

Starting Up the Robot

3.1

System Power-Up

Press and hold the power button on the upper left of the teach pendant.

•

The power for systems such as the robot, controller and teach pendant is turned on.

•

Once the system is powered on, the LED indicator for the robot lights up.

•

Press the shutdown button on the teach pendant or press and hold the power button on the
upper left of the teach pendant for 2 seconds.

The shutdown popup is displayed on the screen.

Press the OK button on the shutdown popup to properly shutdown the system.

Note

If the system does not power up, check the power switch at the bottom of the controller.

Содержание A0509






























































































































































































































































Результаты поиска

Содержание A0509

Отзывы:

Бренды по названию

Популярные бренды

Doosan A0509, Руководство пользователя

Результаты поиска

Содержание A0509

Отзывы:

Бренды по названию

Популярные бренды