Wireless Modem Assembly
Part Number 1815-740
IMPORTANT!
Wireless modems are configured for DoorKing systems.
Do not change the switches on the
modems.
Doing so will change their programming and the modems will not function with DoorKing
products.
Parts List for P/N 1815-740
1. P/N 1815-726 - RF Modem USB Configured includes:
•
Quick Start Guide
•
X-CTU software CD
•
Antenna 1/2 Wave Dipole
•
USB Cable, 6-Ft.
•
Power adapter, 9V 1A
2. P/N 1815-725 - RF Modem RS 232 Configured includes:
•
Antenna 1/2 Wave Dipole
•
Serial Loop Back Adapter
•
Null Modem Adapter
•
Power adapter, 9V 1A
3. P/N 1818-040 - RS 232 Cable 6-Ft.
4. P/N 1815-721 – CD MaxStream 2060 Files
5. P/N 1815-760 – Manual
Notes:
•
You must install USB driver on your PC using the X-CTU CD.
•
The X-CTU software, the MaxStream CD and the
RED
serial loop back adapter are
used for trouble shooting only.
•
You may cut and splice the wires for the power adapters if necessary.
However,
you must observe the polarity! I.E., striped wire to striped wire. Permanent
damage will occur to the modem if polarity is incorrect!
For wire runs up to 100
feet, use 22 AWG wire. For wire runs up to 200 feet, use 18 AWG wire.
•
If installed outdoors, the modem and power supply must be installed in a rain-tight
enclosure.
P/N 1815-760 REV A 10/07
Page 1
