14 FT 2-PIECE OCTAGON ARM INSTALLATION
Installation
DoorKing Part Numbers
1601-567
14 Ft 2-Piece Octagon Arm Kit
1601-534
Octagon Arm Power Kit
1601-242
Octagon Arm Bracket Kit
These 3 kits are designed
for a 1601 barrier gate operator (with or without 1473 board convenience open) or a 1603
auto spikes operator. It
CANNOT
be used with a 1602 operator. Provides a built in reversing edge and red/green LEDs
on a
14 ft
2-Piece
octagon arm. When the arm is raised, LEDs turn
GREEN
, and turns
RED
when lowered and
remains
RED
in the down position. Arm will reverse if lowering and a obstruction is encountered.
Note: DO NOT
operate arm without a normally functioning reverse edge installed.
Allow arm to protrude
about 1” past the end
of arm bracket. Make
sure arm cover fits
over arm.
Arm Bracket
Hub
Arm Cover
14 Ft Arm
Install Arm
Hub
MUST
already be installed
on gate operator.
See 1601 Installation/Owner’s
manual for correct hub
installation.
2
Connect Arms
Together
1
Secure arm to coupler using self-tapping screws
through
pre-drilled
holes in arm.
7 Ft Arm
7 Ft Arm
Coupler
Drawings NOT to scale
1
1601-269-A-9-19