How to use speaker (charging box):
1. Bluetooth Setup:
Press and hold power button to turn ON the speaker ,LED Indicator will flash BLUE when in
pairing mode. Turn on the Bluetooth function on mobile device, select “Cling Bluetooth
Speaker”pairing name.LED will turn solid BLUE if successfully paired, Speaker will automatically
pair if the mobile device has been paired before.If disconnect Bluetooth after 5 mins, the speaker
Bluetooth will auto shut off. Long press Power button to turn off the speaker.
2.Playing Music:
It has a built in microphone, can answer phone calls on speaker.
Short press to control volume, long press to control audio tracks.
It will auto off after disconnect Bluetooth 5mins. With tones prompts.
Playback time at max volume is about 3hrs.
2.
Charging the speaker
Connect the provided charging cable to a power source and to the USB port on the bottom of the
speaker. Red LED light when charging the speaker, light turn OFF when fully charged.
How to use the earbuds:
1. Bluetooth pairing:
Remove earbuds from case, prompt a voice "Power on", then a beep to indicate both
earbuds sync to each other, now main earbud LED flash Red& Blue, secondary earbud flash
Blue slowly. Turn on the Bluetooth function on mobile device, Select "TWS Earbuds" pairing
name.After connect Bluetooth, prompt a voice "connected".now both earbuds LEDs flash
blue slowly.Disconnect Bluetooth will prompt a voice "Disconnected". Long press earbuds
button about 5 seconds to power off earbuds and hear a voice prompt "Power off".
If disconnect Bluetooth after 5 mins, the earbuds will auto shut off.
2. Playing Music
Play/Pause/Answer call/Hang up – One tap/touch/click on button
Next track – Double tap/touch/click on button, Right Earbuds
Previous track – Double tap/touch/click on button, Left Earbud
Activate voice assistant – Long press on button
2 seconds
, both earbuds
Reject call – Long press on button
2 seconds
when calling.
long press the button 5 seconds to turn off , long press 3 seconds to turn on.
3. Charging the earbuds
