Fuse box
126
D760.H03E-001.H1907
Adjustment of Steering Wheel
Angle adjustment
1. Hold the steering wheel by right hand;
2. Press the upper unlock button on the
pneumatic valve switch by left hand;
3. Adjust the fore-and-aft angle of the steering
wheel as needed;
4. Keep it at a proper position until locking
exhausting sound is heard or press the
upper lock button on pneumatic valve
switch.
UP-DOWN adjustment
1. Press the upper unlock button on the
pneumatic valve switch by left hand;
2. Hold the steering wheel to a proper position by both hands;
3. Adjust the steering wheel upward and downward as needed;
4. Keep it at a proper position until locking exhausting sound is heard or press the
upper lock button on pneumatic valve switch.
CAUTION:
Ensure that you can hear locking exhausting sound of pneumatic valve
switch.
Ensure to adjust the steering wheel when the air pressure of the com-
plete vehicle is more than 0.4Mpa.
WARNING:
Adjusting the position of the steering wheel is strictly prohibited during
driving.
Towing Hook
Before using the towing hook, remove its
pin cover as follows:
Removal method for towing hook pin cover at
driver's side
1. Use a screwdriver to remove the two bolts
on towing hook cover, and take the towing
hook pin cover out from the slot.
2. Take the towing hook from the toolkit and
screw into the hook threaded holes.
Pneumatic switch
1. Bolt
2. Tow hook pin cover
