Installation, Operation and Maintenance manual
9
WSO Flex
INSTALLATION
Unloading and transport to location
Before unloading, remove all packing and strapping.
A crane or forklift is recommended for the unloading, transport and installation
of the mist collector.
Connect lifting sling to the lifting eye bolts with clevis pins and distribute loads equally.
Use spreader bar if necessary. If a forklift is used, fasten the unit securely to the
forklift using straps that are tied around the unit and mast of the forklift.
Installation tips
Enclosed machines: do not place the mist collector inlet directly above an opening
(e.g. chip conveyor on CNC turning center)
1
Clean air outlet
2
Enclosure opening
3
Ambient air
1
2
3
Figure 2: Enclosed machines
Open machines: be sure that the air is drawn across the source and into the
collector (e.g. on a wet surface grinder a collection hood is positioned near the
source for the best results).
