Installation, Operation and Maintenance manual
8
WSO Flex
PRIOR TO INSTALLATION
Location
The WSO Flex mist collector should be located with consideration for:
• hopper drainage
• shortest runs of inlet and outlet ductwork
• radius bends on elbows as big as possible
• easy access to electrical connections
• convenience of maintenance
Consult the technical datasheet and drawings for the mist collector
weight and dimensions.
For calculating for foundation or supporting structure consider the following factors :
• the weight of the mist collector
• the material being collected
• all auxiliary equipment
• live loads
Required tools and equipment
• crane / fork lift
• slings / clevis pins and adequate lifting equipment
• standard tools (e.g. screwdrivers, wrenches, etc.)
• drill
• pipe sealant
• level
• reciprocating saw
Delivery and inspection
The mist collector is normally shipped by truck as a completely mounted
mist collector and should be checked for any damage that may have occurred
during shipping. Compare the parts received against the packing list. If there is
damage or parts missing, notify the delivery company and your local Donaldson
representative.
Parts shipped loose with the delivery (depending on your order):
• adjustable mounting stand
• collection bottle
• inlet hopper with flex duct pack
• inlet collars
• inlet hopper / impact separator pack
• spare parts
• hardware / sealant
