Installation, Operation and Maintenance manual
26
WSO Flex
Remote controller with wire
A remote controller consists of 2 casings: connection box and controller box.
connect bulkhead
connection with tubing
connection box
controller box
motor cable
close off both DP couplings with
blanking plug
MAIN
HEPA
Figure 17: Remote controller
1. If a HEPA was delivered with the unit, change the mounted bulkhead connector
with bolt, washers and nut at the back of the unit (if not done yet).
2. Change bolts, washers and nuts at the right side of the controller back plate to
the delivered bulkhead connectors (If not done yet).
