4
Donaldson™ iCue™ Sensor Integrated Gateway
Magnets
Magnets with pre-applied adhesive have been supplied to allow
for quick and easy installation. The magnets can be applied to the
gateway and/or the power supply. To use the magnetic mounts:
1. Verify the device surface is clean and dry.
2.
Remove the film from the adhesive disc mounted to the
magnet and firmly press the magnet into place.
3. Remove the metallic keeper and insulator from the magnets
and mount the device.
Note: Allow 20 minutes for the adhesive to cure prior to
mounting the gateway from a metallic surface.
Flange
The gateway and power supply may be mounted using the
mounting flanges of each device. Hardware to mount the
components using the flanges is to be provided by the installer.
The Gateway requires 7-32 VDC input power. A single-phase power supply is included in the kit to power the gateway. Reference
Terminal Strip Designators for terminal strip locations when installing the VDC power wiring. Reference the power supply label for
wire color coding.
Mounting
Gateway Electrical Installation
