background image

Donaldson warrants to the original purchaser only that the Goods will be free from defects in material and manufacture for the applicable 

time periods stated below: (1) Major structural components for a period of ten (10) years from the date of shipment;  (2)  Non-Structural, 

Donaldson-built components and accessories including Donaldson Airlocks, TBI Fans, TRB Fans, Fume Collector products, Donaldson 

built electrical control components, and Donaldson-built Afterfilter housings for a period of twelve (12) months from date of shipment; and 

(3) Donaldson-built filter elements for a period of eighteen (18) months from date of shipment.
Buyer is solely responsible for determining if goods fit Buyer’s particular purpose and are suitable for Buyer’s process and application. 

Seller’s statements, engineering and technical information, and recommendations are provided for the Buyer’s convenience and the 

accuracy or completeness thereof is not warranted. If, after Seller receives written notice, within the warranty period, that any goods 

allegedly do not meet Seller’s warranty, and Seller, in its sole discretion, determines that such claim is valid, Seller’s sole obligation and 

Buyer’s exclusive remedy for breach of the foregoing warranty or any Seller published warranty, will be, at Seller’s option, either: (i) repair 

or replacement of such goods or (ii) credit or refund to Buyer for the purchase price from Seller. In the case of repair or replacement, 

Seller will be responsible for the cost of shipping the parts but not for labor to remove, repair, replace or reinstall the allegedly defective 

goods. Refurbished goods may be used to repair or replace the goods and the warranty on such repaired or replaced goods shall be 

the balance of the warranty remaining on the goods which were repaired or replaced. Any repair or rework made by anyone other than 

Seller is not permitted without prior written authorization by Seller, and voids the warranty set forth herein. Seller warrants to Buyer 

that it will perform services in accordance with the Sales Documents using personnel of required skill, experience and qualifications 

and in a professional and workmanlike manner in accordance with generally recognized industry standards for similar services. With 

respect to any services subject to a claim under the warranty set forth above, Seller shall, in its sole discretion, (i) repair or re-perform 

the applicable services or (ii) credit or refund the price of such services at the pro rata contract rate and such shall be Seller’s sole 

obligation and the exclusive remedy for breach of the foregoing warranty on services. Products manufactured by a third party (“Third 

Party Product”) may constitute, contain, be contained in, incorporated into, attached to or packaged together with, the goods. Buyer 

agrees that: (a) Third Party Products are excluded from Seller’s warranty in this Section 7 and carry only the warranty extended by the 

original manufacturer, and (b) Seller’s liability in all cases is limited to goods of Seller’s design and manufacture only. EXCEPT FOR 

SELLER’S WARRANTY OF TITLE TO THE GOODS, SELLER EXPRESSLY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES 

WHATSOEVER, WHETHER, EXPRESSED OR IMPLIED, ORAL, STATUTORY, OR OTHERWISE, INCLUDING BUT NOT LIMITED 

TO  MERCHANTABILITY,  FITNESS  FOR A  PARTICULAR  PURPOSE,  NON-INFRINGEMENT  OF  THIRD  PARTY  INTELLECTUAL 

PROPERTY AND ANY WARRANTIES ARISING FROM TECHNICAL ADVICE OR RECOMMENDATIONS, COURSE OF DEALING 

OR OF PERFORMANCE, CUSTOM OR USAGE OF TRADE. Seller’s obligations do not cover normal wear and tear or deterioration, 

defects in or damage to any goods resulting from improper installation, accident or any utilization, maintenance, repair or modification of 

the goods, or any use that is inconsistent with Seller’s instructions as to the storage, installation, commissioning or use of the goods or 

the designed capabilities of the goods or that, in its sole judgment, the performance or reliability thereof is adversely affected thereby, or 

which is subjected to abuse, mishandling, misuse or neglect or any damage caused by connections, interfacing or use in unforeseen or 

unintended environments or any other cause not the sole fault of Seller, and shall be at Buyer’s expense. Seller’s warranty is contingent 

upon the accuracy of all information provided by Buyer. Any changes to or inaccuracies in any information or data provided by Buyer 

voids this warranty. Seller does not warrant that the operation of the goods will be uninterrupted or error-free, that the functions of the 

goods will meet Buyer’s or its customer’s requirements unless specifically agreed to, or that the goods will operate in combination with 

other products selected by Buyer or Buyer’s customer for its use.
The terms of this warranty may only be modified by a special warranty document signed by a Director, General Manager or Vice 

President of Donaldson. To ensure proper operational performance of your equipment, use only genuine Donaldson replacement parts.

This Product is provided subject to and conditioned upon Donaldson’s Terms of Sale (“Terms”), a current copy of which 

is located at termsofsale.donaldson.com. These Terms are incorporated herein by reference. By purchasing or using this 

Product, the user accepts these Terms. The Terms are available on our website or by calling our customer service line 

at 1-800-365-1331.

 Torit Backward Inclined Fan, TBI-3 through 30

 16

Donaldson Industrial Air Filtration Warranty

Содержание TBI 10





















Отзывы: