Downflo Oval, DFO 1-1 to 3-3
14
10-Gallon Pail Pack
A 10-gallon pail pack is standard with all models. A
sturdy band clamp secures the cover to the 10-gallon
pail.
For dust removal:
1. Loosen and remove cover clamp and cover.
2. Dispose of dust.
3. Reinstall the dust bin, cover and clamp.
25-Gallon Dust Bin
A 25-gallon dust bin is optional with all models. A sturdy
band clamp secures the cover and dust bin to the
collector hopper flange.
For dust removal:
1. Loosen and remove band clamp.
2. Remove dust bin with cover.
3. Remove cover by releasing draw latches.
4. Empty dust bin.
5. Install cover on the dust bin and clamp down with
draw latches.
Exhaust Damper Adjustment
10-Gallon Pail Pack
hopper
flexible hose
hose clamp
10-gallon
pail
pail cover
hex bolt
flat washer
hex nut
sealant
cover clamp
adapter collar
fully closed
damper
open
6. Install dust bin with cover under collector hopper
flange.
7. Install band clamp over hopper outlet and bin cover
and tighten band clamp.
dust bin 25-gal
band clamp
draw latch
cover 25-gallon
25-Gallon Dust Bin
Exhaust Damper
An exhaust damper control regulates or limits airflow
when collector is in operation. Before start-up, set
damper control to the fully-closed position as shown
below. Adjust airflow by loosening the wing nut and
sliding the handle to open the damper. When replacing
filters, reset the damper to the fully-closed position and
adjust airflow.
