DOMUSA DUAL CLIMA 11, Инструкция по установке и эксплуатации, Страница: 6 / 48

DUAL CLIMA
4
The electronic controller of the DUAL CLIMA heat pump has a function for protection against the
freezing of the water in its interior in periods of frost. For this function to remain active and on alert,
the heat pump must be connected to the mains and have a power supply, even if it is switched off
or not in use.
A water filter should be installed in the installation, in order to avoid obstructions in the water
circuit of the heat pump. It must be installed in the return circuit of the heat pump and MUST be
installed before filling and circulating the water through the installation. The water filter should be
checked and cleaned, if necessary, at least once a year. IN new installations, however, it is advisable
to check it within the first few months of its commissioning.
2 ELECTRONIC CONTROLLER
2.1 Control buttons
The electronic controller of the DUAL CLIMA heat pump has 6 control buttons, through which all
the features and adjustable settings can be managed.
Power button: This button switches the heat pump on and off. It can also be used to exit
the different adjustment menus (Escape key).
Mode button: This button selects the operating mode.
Confirmation button: This button saves and confirms the selected adjustment value.
Adjustment buttons: Pressing these buttons increases and decreases the selected
adjustment value. It can also be used to navigate within the
different adjustment menus.
Clock button: This button accesses the adjustments related to the time and time
programming of the heat pump.