DOMUSA TEKNIK LIGNUM NG 20, Инструкция по установке и эксплуатации

Страница: 22 / 44

Lignum NG
20
8.3 Safety warnings:
8.3.1 Safe handling of ashes
For safe handling of the ashes, you should take the necessary safety precautions and wear
suitable clothing to protect against possible injury. The following advice should be particularly
taken into account:
- Shut down the boiler operation before removing the ashes.
- It is recommended to wear heatproof
"thermal gloves"
to protect your hands from any burns
from hot parts of the drawer.
- It is recommended you wear a "protective mask" to avoid breathing in any ash particles,
particularly in the case of people with allergies or any type of respiratory trouble, who should
always wear a mask when carrying out ashes.
- As the ash to be removed may be burning or glowing, special precautions should be taken with
regard to the type of container it is emptied into. A
metal
container is recommended, or
the
ash should be totally put out at the time of handling, using water or another extinguishing
agent.
DOMUSA TEKNIK shall not be liable for any damage caused to people, animals or property as a
result of incorrect handling of the ash drawer or the ash itself.
IMPORTANT: The ash clearance must only be undertaken when the boiler is switched off.
8.3.2 Hazards related to the door of the fuel loading chamber.
To avoid hazards related to the door of the fuel loading chamber, take the following advice into
account:
- If opening the fuel loading door when there is combustion in the housing, do so carefully. First
open very slightly. Keep your body and face away from the fuel loading door.
- Close the door of the fuel loading chamber immediately after performing the control of the
fuel load amounts or after having reloaded fuel.
- The danger of deflagration increases after uncontrolled conditions in the installation (power
cut).
- Let the installation cool down before opening it.
- Do not open the door of the combustion chamber during/after a power cut.
- The flames can cause damage to the control unit.
- Inspect the doors and joints of the installation in search of possible leaks.