Domus Ventilation CMX-S Скачать руководство пользователя страница 1

CMX-S

Installation Instructions

Central Mechanical Extract Ventilation (cMEV) appliance 

1.0 SAFETY INFORMATION

• 

DO NOT SWITCH OFF THE UNIT

 – it is designed to run continuously. If the unit is switched 

off, indoor pollutants and moisture levels may increase which could endanger your health or 
damage your home. It is important to follow the advice in this manual and correctly maintain the 
system to ensure a healthy indoor environment.

• 

All wiring must be in accordance with prevailing national regulations, for example the current 

IEE Wiring Regulations BS7671. The electrical installation should be inspected and tested by a 
suitably qualified person after completion. 

• 

The installer is responsible for the installation and electrical connection of this system on site. 

It is the responsibility of the installer to ensure that the equipment is safely and securely installed 
and left only when electrically and mechanically safe.

• 

When installing the appliance, care should be taken not to damage any hidden utilities.

• 

Ensure that the mains supply (Voltage and Frequency) complies with the rating label.

• 

Isolate from power supply before removing any covers. During installation / maintenance 

ensure all covers are fitted before switching on the mains supply. 

• 

The appliance should be provided with a local double pole fused spur fitted with a 3 Amp fuse 

and a minimum contact separation of at least 3mm. 

• 

This unit must be earthed.

• 

Ducting must be securely fixed with screws to the spigot to prevent access to live parts. Duct 

runs terminating close to the fan must be adequately protected by suitable guards.

• 

All regulations and requirements must be strictly followed to prevent hazards to life and 

property, both during and after installation and any subsequent servicing or maintenance.

• 

This appliance should not be used by children or persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge, unless they have been given supervision 
or instruction concerning the safe use of the appliance by a person responsible for their safety. 
Children shall not play with the appliance. Cleaning and user maintenance shall not be carried 
out by children.

LAB964R  

|  

JAnuARy 2021

PAGE 1

Содержание CMX-S









Отзывы: