Revision: 1.0
DBS Nano PRO Transmitter User Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 7-39
7.2
Software Upgrade via a Terminal Program
1. Establish terminal communications, explained in
Section 6.4
2. Navigate the OLED display menu to
Unit>Software Upgrade
and press enter to access the
upgrade options. Type a capital
A
(
shift
+
a
) on a keyboard to select Full upgrade.
3. The erase could take a couple of minutes to complete. Progress is shown by an increasing
number of
#
characters. Once complete
Download code:
will be shown in Tera Term.
4. Select
File>Send File
and ensure the
Binary
checkbox is checked as shown below. Select the
upgrade file and click
Open
.
5. A progress box will appear as shown below. This will disappear once the file transfer is complete.
Progress is also shown by an increasing number of
–
and
+
characters on the terminal display.
6. When the file transfer is complete, the NTX will respond on Tera Term with a series of messages.
Verifying
followed by
Programming
with progress characters.
7. When programming is complete, the NTX will reboot.
