Revision: 1.0
Sapphire-BTX Setup Guide
Copyright © 2022 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-22
5.7 Unit Page
The Unit page allows you to change the IP address settings for the unit. It also provides settings for
fan speed, unit name and password, if required.
Apply
– this button will save changes to settings and make them active.
Refresh
– if you make changes but do not click Apply, click the Refresh button to return the
current settings.
Restore Defaults
– this button will return the unit to the factory settings. That is the condition that
the device was originally delivered in.
Reboot
– this will perform a full unit reboot. During the reboot, there will be a pause in operation.