Domino Gx-OEM Скачать руководство пользователя страница 106

Страница: 106 / 198

LABEL EDITOR DEFAULT SETUP

Element Property Defaults

To set the default property values for text and image elements that are used in the label creator:

1. Select

Home > Setup > Editor defaults > Element property defaults

2. Define the default settings for text and image elements.

End of procedure.

Content Property Defaults

To set the default content property values for clocks, counters, reference, script and variable

elements that are used in the label creator:

1. Select

Home > Setup > Editor defaults > Content property defaults

2. Define the default settings for the clock, counter, reference, script, and variable text

elements.

End of procedure.

Label Defaults

To set the default label settings that are used in the label creator:

1. Select

Home > Setup > Global print settings > Label defaults

2. The settings listed below can now be defined:

Setting Name

Explanation

Label width (mm)

Define the print width of the label in millimetres.

Forward offset (mm)

Define a space before the start of the label to position the label on

the print surface.

Reversed offset (mm)

Define a space after the end of the label to position the label on

the print surface.

Box width (mm)

Note

This setting is used when a single photocell encoder

is used to measure the production line speed.

Set the size of products on the production line.

Delay after Input Intell.

Microp. (mm)

Set a delay before the intelligent micro purge.

Speed modification (%)

Shrink or stretch printing when external print speed mode is

selected (negative values shrink, positive values stretch).

Production speed (m/min)

Set the fixed print speed when

Print speed mode

is set to

Internal

Or, set the speed for the first label, if a photocell encoder is used

to measure the production line speed.

INSTALLATION

101

EPT053091 - Issue 5 - 07 May 2021

Содержание Gx-OEM







































































































































































































Результаты поиска

Содержание Gx-OEM

Отзывы:

Похожие инструкции для Gx-OEM

Бренды по названию

Популярные бренды

Domino Gx-OEM, Руководство по эксплуатации продукта

Результаты поиска

Содержание Gx-OEM

Отзывы:

Похожие инструкции для Gx-OEM

Бренды по названию

Популярные бренды